| | | | | | 
SPECIFICATION | | Block
Size(L X H) | 600
x 200 | | Wall Thickness | 75 100 150 2000 | | Weight | 7.2kg 9.6kg 14.4kg 19.2kg | | Compressive
Strength | 2.8(N/mm2) | | Density | 800
kg/m3 | | Thermal Conductivity
| 0.16 | | Sound
Reduction | 30
- 50 db |
| Quality
: | | +
Light Weight | +
Thermal Insulated | +
Fire Proof | +
Easy Workability | +
Low Water Absorption | | +
Weather Resistant | +
High Strength | +
Sound Proof | +
Termite Proof | +
Environment Friendly | | | | Features
: | - CLC
is non-flammable.A 100mm(4")thickness of CLC density 1200 kg/m3provides over
4 hours of fire endurance.
- Being normally cured cement based product,it
continues to gain strength with time so long as some moisture is available in
the environment. Structures built over three decades ago are still
sturdy
requiring litle maintenance. This is unlike timber constructions,
Which deteriorate with time.
- CLC,unlike timber is impervious to
attack by any kind of white ants,termites or pests.
- It has much
superior thermal insulation charcteristics than dense concrete,concrete block,as
indicated above.
- CLC structures have proven to withstand all types
of severe weather conditions in dry hot desert,rainy and windy coastal of cold
hilly areas in over 45 countries in the world.
- This material does
not produce any pollutants or toxic substances either during its manufacture of
it's use in the structure.
- CLC reduces transmission of sound. CLC
finds extensive application for filling over structural slabs and below floor
finish.
- CLC can be worked on like timber. Nails can
easily be driven into it and would stay in position. Un-reinforced
blocks can easily be cut with a wood aw or chases for service lines easily and
quickly cut with the help of a mechanized chase cutter.
- In view
of the itrinsic minute air bubbles in CLC being segregated from one another,the
water absorption of this material is relatively lower. it is 8.5%fora
density of 800 kg/m3 and 3.75% only for the density of 1,400 kg/m3. This
compares much better than ordinary brick, which has water absorption of around
13.5% and AAC blocks, Where it may be as hight as over 50% by weight.
- The
primary raw materials needed for its manufacture are Cement,Sand, Water &
Preformed Stable Foam,and Fly Ash,FLY - ASH - a nuisance industrial waste product
from thermal power plants.
|
|
|
|
| | |
